US Leisure : Poweramp

Below are a list of frequently asked questions. If you have any additional questions, please contact us and a customer service representative will be happy to assist you.
Are there any precautions I should do before I begin using PoweRamp™ Car Ramps? What is the maximum weight each PoweRamp™ Car Ramp will support? What is the maximum weight each pair of PoweRamp™ Car Ramps will support? What is the maximum allowable tire width for PoweRamp™ Car Ramp? What type of surface should PoweRamp™ Car Ramps be placed on when in use? Where should the load of the vehicle be on PoweRamp™ Car Ramps? Can I use other lifting equipment while using PoweRamp™ Car Ramps? What repairs should I NOT do while using PoweRamp™ Car Ramps? Can I use only one PoweRamp™ Car Ramp or two PoweRamp™ Car Ramps to support one side of the vehicle? What is the best way to position my vehicle on PoweRamp™ Car Ramps? Should I have help while attempting to use PoweRamp™ Car Ramps? What is the proper procedure to use PoweRamp™ Car Ramps? Once my vehicle is on PoweRamp™ Car Ramps is there anything I should do? Can I modify PoweRamp™ Car Ramps to accept any after market attachments or accessories from other manufacturers?
Q1:	Are there any precautions I should do before I begin using PoweRamp™ Car Ramps? Yes a visual inspection shall be made before each use by checking for abnormal conditions, such as cracked welds, leaks and damaged loose or missing parts. Ramps must be free of grease, oil and dirt. Never use if visual inspection shows any of these conditions. DESTROY AND DISCARD RAMPS IF WORN OR DAMAGED. Call US Leisure-Toll Free at 1-877-638-7056 for return, repair or replacement instructions.

Q2:	What is the maximum weight each PoweRamp™ Car Ramp will support? Do not exceed rated capacity- 3,000 lbs. each.

Q3:	What is the maximum weight each pair of PoweRamp™ Car Ramps will support? Do not exceed rated capacity- 6,000 lbs. per pair

Q4:	What is the maximum allowable tire width for PoweRamp™ Car Ramp? The maximum allowable tire width is 9 ½ inches.

Q5:	What type of surface should PoweRamp™ Car Ramps be placed on when in use? Use only on hard level surface that can bear the load

Q6:	Where should the load of the vehicle be on PoweRamp™ Car Ramps? Center load between the sides of the ramp

Q7:	Can I use other lifting equipment while using PoweRamp™ Car Ramps? No do not use other lifting equipment in conjunction with ramps.

Q8:	What repairs should I NOT do while using PoweRamp™ Car Ramps? Do not disconnect brakes, engine, transmission components, drive train, drive shaft, universal joints, or wheels while the vehicle is to be driven on the ramps.

Q9:	Can I use only one PoweRamp™ Car Ramp or two PoweRamp™ Car Ramps to support one side of the vehicle? No use as a matched pair to support one end of a vehicle only. Not to be used to simultaneously to support both ends or one side of a vehicle. Use of this product is inherently dangerous. It is important that you strictly read and follow these Additional Safety Messages.

Q10:	What is the best way to position my vehicle on PoweRamp™ Car Ramps? Be sure the wheels to be driven on the ramps are positioned straight forward in alignment with the ramps, and center the two ramps against the tires.

Q11:	Should I have help while attempting to use PoweRamp™ Car Ramps? Another person, standing clear from vehicle path, should observe and guide the vehicle operator when ascending and descending the ramps.

Q12:	What is the proper procedure to use PoweRamp™ Car Ramps? Never accelerate or apply brakes suddenly. Proceed slowly and cautiously. Once the vehicle reaches the top of the ramps, apply brakes only to prevent over travel. Do not apply brakes while ascending as that may cause ramps to shift.

Q13:	Once my vehicle is on PoweRamp™ Car Ramps is there anything I should do? Place the vehicle in neutral. Release brakes; vehicle should not move. Set emergency brake. Place vehicle in park (or in reverse gear for manual transmission). Chock wheels on the ground. Be sure that both tires are properly positioned on the ramp’s support platform. Using caution in positioning your body clear of danger, shake vehicle sideways and endways to be sure that vehicle and ramps are stable. Check that ramps have not become damaged or bent during loading. Discontinue use immediately if you believe ramp has been subject to abnormal or excessive load or shock.

Q14:	Can I modify PoweRamp™ Car Ramps to accept any after market attachments or accessories from other manufacturers? No alterations shall be made to this product. Only attachments and/or accessories supplied by US Leisure shall be used with this product. If operator is not fluent in English, all warnings and safety instructions shall be read and discussed with the operator in the operator’ s native language by the purchaser/owner or his designee, making sure that the operator comprehend the contents. Ramps must be maintained in accordance with these instructions and inspected at least annually by qualified personnel. Damaged parts and warning labels must be replaced. REMEMBER- If you have any questions or need any parts or information call US Leisure immediately-Toll Free 1-877-638-7056.

Manufactured by: Sun Terrace Casual Furniture Inc. d/b/a US Leisure 2369 Charles Raper Jonas Highway Stanley, NC 28164 1-877-638-7056 uslcs@keter.co.il